Gamma 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Is Manual de usuario descargar pdf (Pagina 21)

Clamping the First Main String

Secure the tensioned main string using the

remaining String Clamp. Repeat the proce-

dure for all of the remaining main strings and

tie off at the appropriate holes following the

racquet manufacturers specif cations.

Follow the manufacturer ’s recommended

stringing pattern for one or two piece stringing.

This will determine the starting point for the

cross strings. If applicable, tie the f rst cross

string using an appropriate starting knot.

Weaving the Cross Strings

Weave the cross strings over and under

the main strings being careful to alternate

the weave of each consecutive cross string

to be opposite of the previously installed

cross string.

STRINGING THE FRAME

Completing the String Job

Once the f nal cross string is tensioned

and clamped, tie off at the appropriate hole

specified by the racquet manufacturer .

Rotate the Hold Down Lever up and re-

move the racquet Hold Down Clamps from

the Mounting Stands. Rotate the Mounting

Stand Adjustment Knob on the Turntable

to disengage the racquet from the white

Racquet Supports and remove the racquet

from the Mounting System.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Sin comentarios

Gamma 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Is Manual de usuario Pagina 21