Gamma 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Is Manual de usuario descargar pdf (Pagina 12)

STRING CLAMPS

Clamp Base Operation

To lock the string clamp base to the turntable,

rotate the clamp base locking lever clock-

wise. To release the string clamp base from

the turntable, rotate the clamp base locking

lever counter-clockwise.

The Locking Lever should be tightened

enough to prevent clamp base slippage on

the turntable, when the desired tension is

placed on the string. To go from the loose

position to the clamped position and back,

generally requires the rotation permitted by

the slot in th clamp base.

String Clamp Operation

The string c

lamps are a dual action design

where the string clamp and clamp base

operate independently of one another.

To clamp a string, lift the clamp head and

place the string between the jaws and de-

press the string clamp lever to secure the

string. The clamping pressure applied to the

string should be adjusted to provide suffi-

cient pressure to secure the string when

subjected to the desired pulling tension. The

diamond coated gripper plates provide for

increased friction between the clamps and

the string to allow for reduced clamping pressure while securing and holding the string under

tension.

MOUNTING THE FRAME

Adjusting the Inner Racquet Supports

The white racquet supports are adjustable to accommodate all

racquets and provide maximum support to the racquet frame.

Screw the the pads up or down so they contact the frame at

a maxium height without blocking the grommet holes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Gamma 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Is Manual de usuario Pagina 12